Anonabox

Anonabox Pro – Disable Wi-Fi

 in Other  tagged Anonabox / Anonabox Pro / disable / wi-fi / wifi by

The following video demonstrates how to disable the Wi-Fi on an  Anonabox Pro.

  1. Connect to the device via the LAN Ethernet port.
    It has a build DHCP server by default so you do not need to configure the IP.
    After you get connected, go to the default location of the device interface, which is http://192.168.19.84:1776/.
  2. After the interface loads, enter the root password and click on the Login button.
    (if you are using a brand new Anonabox or a box that was recently flashed then click on the Login button without entering a password (if you enter one, it will be ignored)).
  3. Then, go to the top menu Network and select the option Wireless
  4. At the new page, under the category Wireless Overview click on the Disable button.
  5. Finally, click on the OK button when you get the Really shut down network? confirmation box and wait for the changes to get applied, the image with the Wi-Fi logo will change to one that has a red stamp on it and right under the SSID field you will get the message Wireless is disabled or not associated.

To enable the WiFi, just repeat the steps above and click on the Enable button.

Anonabox Pro – Set Root Password On Initial Setup

 in Other  tagged Anonabox / Anonabox Pro / initial / password / root by

The following video demonstrates how to setup the root password for a new (or recently flashed) Anonabox Pro.

  1. Connect to the device via the LAN Ethernet port.
    It has a DHCP server by default so you do not need to configure the IP.
    After you get connected, go to the default location of the device interface, which is http://192.168.19.84:1776/.
  2. After the interface loads, click on the Login button without entering a password (if you enter one, it will be ignored).
  3. Then go to the top menu System and select the option Administration
  4. At the new page, under the category Router Password enter the password you wish to use both at the Password and Confirmation fields.
  5. Finally, click on the Save & Apply button and wait for the changes to get applied, a confirmation message will appear at the top of the page under the top menu.