fedora

Fedora 24: Solution to gcrypt.h: No such file or directory

 in C  tagged C++ / decrypt / fedora / gcc / libgcrypt-devel / linux / vpn / vpnc by

Recently we tried to compile cisco-decrypt.c* on Fedora 24 (64bit).
We got the full source code from the website of Maurice Massar.
Download full source code here: [download id=”2078″]

We needed this tool to configure the Gnome 3 native network client to connect to a specific Cisco VPN network.
During the configuration we setup a “Cisco Compatible VPN (vpnc)” VPN.

* Please note that this tool is NOT a hacking nor cracking tool. In order for you to make any use of it, you need to have a valid PCF file given to you by your system administrator. It is only useful when you need to get the group password to configure a system that does not accept the PCF file with the encrypted password.

To compile the code you can use one of the following two methods:

Compilation method 1

gcc -Wall -o cisco-decrypt cisco-decrypt.c $(libgcrypt-config --libs --cflags)

If the package libgcrypt-devel is not installed you will get a prompt message as follows, which will instruct you to install the missing package.
You need to type y to both questions so that the installation will proceed. Once the installation is done, execute once more the compilation command.

As you can see below, you might get a whole bunch of errors, ignore them and try to compile once more. It seems to be a bug that will not affect the end result (at least in this scenario).

gcc -Wall -o cisco-decrypt cisco-decrypt.c $(libgcrypt-config --libs --cflags)
bash: libgcrypt-config: command not found...
Install package 'libgcrypt-devel' to provide command 'libgcrypt-config'? [N/y] y

Proceed with changes? [N/y] y

gcc: error: Waiting: No such file or directory
gcc: error: in: No such file or directory
gcc: error: queue...: No such file or directory
gcc: error: Loading: No such file or directory
gcc: error: list: No such file or directory
gcc: error: of: No such file or directory
gcc: error: packages....: No such file or directory
gcc: error: The: No such file or directory
gcc: error: following: No such file or directory
gcc: error: packages: No such file or directory
gcc: error: have: No such file or directory
gcc: error: to: No such file or directory
gcc: error: be: No such file or directory
gcc: error: installed:: No such file or directory
gcc: error: libgcrypt-devel-1.6.6-1.fc24.x86_64: No such file or directory
gcc: error: Development: No such file or directory
gcc: error: files: No such file or directory
gcc: error: for: No such file or directory
gcc: error: the: No such file or directory
gcc: error: libgcrypt: No such file or directory
gcc: error: package: No such file or directory
gcc: error: libgpg-error-devel-1.24-1.fc24.x86_64: No such file or directory
gcc: error: Development: No such file or directory
gcc: error: files: No such file or directory
gcc: error: for: No such file or directory
gcc: error: the: No such file or directory
gcc: error: libgpg-error: No such file or directory
gcc: error: package: No such file or directory
gcc: error: Waiting: No such file or directory
gcc: error: in: No such file or directory
gcc: error: queue...: No such file or directory
gcc: error: Waiting: No such file or directory
gcc: error: for: No such file or directory
gcc: error: authentication...: No such file or directory
gcc: error: Waiting: No such file or directory
gcc: error: in: No such file or directory
gcc: error: queue...: No such file or directory
gcc: error: Downloading: No such file or directory
gcc: error: packages...: No such file or directory
gcc: error: Requesting: No such file or directory
gcc: error: data...: No such file or directory
gcc: error: Testing: No such file or directory
gcc: error: changes...: No such file or directory
gcc: error: Installing: No such file or directory
gcc: error: packages...: No such file or directory

Compilation method 2

In case the above method does not work for you for some reason, you can try the following.

gcc -Wall -o cisco-decrypt cisco-decrypt.c -lgcrypt

If the package libgcrypt-devel is not installed you will get an error as follows.

gcc -Wall -o cisco-decrypt cisco-decrypt.c -lgcrypt
cisco-decrypt.c:30:20: fatal error: gcrypt.h: No such file or directory
 #include <gcrypt.h>
                    ^
compilation terminated.

In this case use

sudo dnf install libgcrypt-devel

to install the missing library and try again to compile.

To use

Open your PCF file with a text editor. Find the line that starts with enc_GroupPwd= and copy the characters after that.

Paste the characters as the first command line argument to the newly compiled application. The password will be the line returned right after.


./cisco-decrypt 886E2FC74BFCD8B6FAF47784C386A50D0C1A5D0528D1E682B7EBAB6B2E91E792E389914767193F9114FA26C1E192034754F85FC97ED36509
Th!sIsMyK3y#

Other notes

In the case you get these errors:

/tmp/ccHrH1kZ.o: In function `c_decrypt':
cisco-decrypt.c:(.text+0x243): undefined reference to `gcry_md_hash_buffer'
cisco-decrypt.c:(.text+0x267): undefined reference to `gcry_md_hash_buffer'
cisco-decrypt.c:(.text+0x2b4): undefined reference to `gcry_md_hash_buffer'
cisco-decrypt.c:(.text+0x31d): undefined reference to `gcry_cipher_open'
cisco-decrypt.c:(.text+0x33b): undefined reference to `gcry_cipher_setkey'
cisco-decrypt.c:(.text+0x356): undefined reference to `gcry_cipher_setiv'
cisco-decrypt.c:(.text+0x382): undefined reference to `gcry_cipher_decrypt'
cisco-decrypt.c:(.text+0x391): undefined reference to `gcry_cipher_close'
/tmp/ccHrH1kZ.o: In function `main':
cisco-decrypt.c:(.text+0x41e): undefined reference to `gcry_check_version'
collect2: error: ld returned 1 exit status

It most probably means that you did not add on your compilation command one of the following two parameters

  1. $(libgcrypt-config –libs –cflags)
  2. -lgcrypt

You need one of these two options to be on the command line to compile.

Fedora 23: Support exfat

 in GNU/Linux  tagged exfat / fedora / fuse-exfat / rpmfusion by

The Background:

Recently we got our hands on a GoPro Hero4 Black camera and we used a 64GB memory card as storage. The file system on the card is exFAT (Extended File Allocation Table), which is a Microsoft file system designed for flash drives. It is proprietary and Microsoft owns patents on several elements of its design. exFAT has been adopted by the SD Card Association as the default file system for SDXC cards larger than 32GiB.

The issue:

Fedora does not support exFat due to the licensing issues that Microsoft applied to the product and thus we could not mount the card on our machine.

The solution:

We installed the fuse-exfat driver from rpmfusion.org using the following commands.

#Enable access to both the free and the nonfree repository
#free repository: for Open Source Software (as defined by the Fedora Licensing Guidelines) which the Fedora project cannot ship due to other reasons
#nonfree repository: for redistributable software that is not Open Source Software (as defined by the Fedora Licensing Guidelines); this includes software with publicly available source-code that has "no commercial use"-like restrictions 
su -c 'dnf install http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm';

#Perform the installation
sudo dnf install fuse-exfat;



More background:


RPM Fusion provides software that the Fedora Project or Red Hat doesn’t want to ship. That software is provided as precompiled RPMs for all current Fedora versions and Red Hat Enterprise Linux 5 and 6.

Fedora/Bash: Get the IP of enp0s3

 in Bash / GNU/Linux  tagged bash / cut / fedora / IP / sed by

Following is a small snippet that will print on screen the IP of enp0s3 (or any other device if you change the name) while in Fedora.
As you will see, it is not a very sound solution as it depends on the structure of the output of ifconfig enp0s3.

Nevertheless is works (for Fedora at least)! 🙂

ifconfig enp0s3 | grep "inet " | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | cut -d ' ' -f 2

What this line does is: first it prints out the configuration information for enp0s3, then finds the line that contains the inet, then using sed it will trim the result (in other words, it will remove all leading and all trailing white-space from the pipe), finally cut gets the second column of the data after separating the line using the space symbol.

The Fedora version that was used for this tutorial is

$cat /etc/fedora-release 
Fedora release 23 (Twenty Three)

The version of ifconfig for this tutorial is

$ifconfig --version
net-tools 2.10-alpha

In case you want to assign the IP of enp0s3 to a variable, you can easily do as follows

IP=`ifconfig enp0s3 | grep "inet " | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | cut -d ' ' -f 2`;