Monthly Archives: November 2014


Our visit to MONTPARNASSE in 2014 was a delightful experience.


Akropoleos 1


+357 22357171





Saint Elena Boutique Hotel


1. Lounge and Meeting Room
2. Café
3. Indoor Pool and Sauna
4. Games Room
5. Outdoor Pool
6. Special Needs — Guests who have special-needs are well catered-for in the overall design of St. Elena! There are extensive ramps and wide-access doorways and passages.


10 Feidiou Street


+357 24626107

+357 24626644





Σταδιοδρομία 2014 – Παρουσίαση “Λειτουργός Πληροφορικής”

Κατεβάστε τη παρουσίαση που προβλήθηκε στις 29 Νοεμβρίου 2014, ώρα 17:50, αίθουσα Α, για  “Λειτουργός Πληροφορικής” εδώ.

Έκθεση Επαγγελμάτων Σταδιοδρομία 2014 - Λειτουργός Πληροφορικής.pdf (243 downloads)

Έκθεση Επαγγελμάτων Σταδιοδρομία 2014 - Λειτουργός Πληροφορικής.odp (223 downloads)

Σχετική ανακοίνωση:

 Σταδιοδρομία 2014

Το Σάββατο 29 & Κυριακή 30 Νοεμβρίου, 11 π.μ. – 1.30 μ.μ. & 3 μ.μ. – 7 μ.μ., θα πραγματοποιηθεί η Έκθεση Επαγγελμάτων “Σταδιοδρομία 2014” που διοργανώνεται από τον Κυπριακό Σύνδεσμο Καθηγητών Συμβουλευτικής και Επαγγελματικής Αγωγής (ΟΕΛΜΕΚ) με τη στήριξη της Τράπεζας Κύπρου.

Η Έκθεση πραγματοποιείται στα Κεντρικά Γραφεία της Τράπεζας στη Λευκωσία και σ’ αυτήν λαμβάνουν μέρος επαγγελματικοί και επιστημονικοί συνδέσμοι, καθώς και άλλοι φορείς, εκπροσωπώντας όλα τα επαγγέλματα που συναντούμε στον εργασιακό χώρο της Κύπρου.

Μαθητές και γονείς ενημερώνονται για τις προοπτικές κάθε επαγγέλματος και στα ερωτήματά τους απαντούν οι ίδιοι οι εκπρόσωποι των συνδέσμων. Κατά τη διάρκεια της Έκθεσης πραγματοποιούνται και προγραμματισμένες ενημερωτικές διαλέξεις. Σχετικό πρόγραμμα μπορείτε να βρείτε πατώντας εδώ( ΣΤΑΔΙΟΔΡΟΜΙΑ 2014 - ΠΡΟΓΡΑΜΜΑ - ΔΙΑΛΕΞΕΩΝ - ΣΑΒΒΑΤΟ 29, ΚΥΡΙΑΚΗ 30 ΝΟΕΜΒΡΙΟΥ 2014 (216 downloads) ).


Για αυτά και για άλλες νέες πληροφορίες, θα μπορείτε να ενημερώνεστε μέσω του  facebook page Stadiodromia (

HOWTO: Make Terminator Terminal Act Like Guake Terminal in Fedora 20/Ubuntu 14.10 8

We tried to toggle the visibility of the terminator window using the configuration in the ‘Terminator Preferences’ under Keybindings.

But, we could not get the hide_window keybinding to work and so we could not toggle the window visibility with a single key.

After trying other versions of the terminator source which also failed we switched to an alternative solution.

This solution requires two additional packages: xdotool and wmctrl.

In Fedora you can install them using sudo yum install xdotool wmctrl and in Ubuntu using sudo apt-get install xdotool wmctrl

After the installation is complete,  you need to paste the following code in a file and make it an executable.

e.g From a terminal issue nano ~/, then paste the code and hit CTRL+X to exit. When prompted if you want to save press ‘Y’ and enter.


#The purpose of this script is to allow the user to toggle the visibility of (almost) any window.
#Please note it will work on the first match, so if there are multiple instances of an application it would be a random window of them the one to be affected.

#Checking that all dependencies are met, since we cannot proceed without them.
declare -a DEPENDENCIES=("xdotool" "wmctrl");
declare -a MANAGERS=("yum" "apt-get");

    echo -n "Checking if $DEPENDENCY is available";
    if hash $DEPENDENCY 2>/dev/null;
        echo "- OK, Found";
        echo "- ERROR, Not Found in $PATH";
        for MANAGER in ${MANAGERS[@]};
            if hash $MANAGER 2>/dev/null;
                echo -n "$DEPENDENCY is missing, would you like to try and install it via $MANAGER now? [Y/N] (default is Y): ";
                read ANSWER;
                if [[ "$ANSWER" == "Y" || "$ANSWER" == "y" || "$ANSWER" == "" ]];
                    sudo "$MANAGER" install "$DEPENDENCY";
                    echo "Terminating";
                    exit -1;


#Checking if the application name provided by the user exists
if ! hash $APPLICATION 2>/dev/null;
    echo -e "$APPLICATION does not seem to be a valid executable\nTerminating";
    exit -2;

#Checking if the application is running. We are using pgrep as various application are python scripts and we will not be able to find them using pidof. pgrep will look through the currently running processes and list the process IDs of all the processes that are called $APPLICATION.
PID=$(pgrep $APPLICATION | head -n 1);

#If the application is not running, we will try to launch it.
if [ -z $PID ];
  echo "$APPLICATION not running, launching it..";
    #Since the application has a live instance, we can proceed with the rest of the code.
    #We will get the PID of the application that is currently focused, if it is not the application we passed as parameter we will change the focus to that. In the other case, we will minimize the application.
  echo -n "$APPLICATION instance found - ";
    FOCUSED=$(xdotool getactivewindow getwindowpid);
    if [[ $PID == $FOCUSED ]];
    echo "It was focused so we are minimizing it";
        #We minimize the active window which we know in this case that it is the application we passed as parameter.
        xdotool getactivewindow windowminimize;
    echo "We are setting the focus on it";
        #We set the focus to the application we passed as parameter. If it is minimized it will be raised as well.
        wmctrl -x -R $APPLICATION;

exit 0

Afterwards, you need to make the script an executable so you should issue chmod +x ~/ to do that.

Then, execute ~/ in your terminal once. We need to do that in order to install any missing dependencies for the tool.

Finally, you need to create a custom shortcut that will call the script using the key combination you like at any point.

For Fedora,

  1. Issue the following in a terminal gnome-control-panel to start the gnome control panel.
  2. In the newly appeared window, click on the ‘keyboard’ icon that is in the category ‘Hardware’.
  3. After that, click on the tab ‘Shortcuts’
  4. and on the left list, click on custom shortcuts.
  5. You will see a button with the + sign, click that.
  6. In the dialog box that will appear enter the following:
    – In the name field enter anything you like. e.g ‘Toggle Terminator Visibility’
    – In the command field enter ‘/home/<USER>/ terminator’ where user enter your own username.
    – Click apply.
  7. You will see a new row with two columns with the name you just set in the first column. Click on the second column, where it should say ‘Disabled’ and the press the key combination you want for toggling terminator e.g F12

For Ubuntu, go to System Settings and follow the same procedure after step 2.

You are ready to go 🙂

Just try the key combination you just provided and terminator will appear in front of you. Pressing it once more it will hide it.