Ετήσια αρχεία: 2018

CloudFlare does not allow port 22 (usual SSH port) on domain 3

 στο Applications  επισημασμένο με ετικέτα cloudflare / DNS / port / server / ssh / ubuntu Από

When you try to connect via ssh on a domain for which you are using CloudFlare as a HTTP proxy, you will get the following error:

$ ssh [email protected]
 ssh_exchange_identification: Connection closed by remote host

You have a few options to resolve for this issue:

  1. Either connect directly to the IP of the machine.
  2. Or, setup a CNAME record with no HTTP proxy for the SSH (so that you do not need to remember the IP).
    This solution does not offer any additional benefits than connecting directly to the IP of the server.
    To do that, you need to visit the configure DNS page for your site: e.g. https://www.cloudflare.com/a/dns/example.com,
    then create the CNAME named ssh, use as target your domain (e.g. example.com) and disable HTTP proxy by clicking on the orange cloud and making it gray before pressing the Add Record button.

    Then, you will be able to connect via ssh [email protected].
  3. Last solution but not least is configuring your server to listen for SSH on one of the ports of CloudFlare that are open.
    When this post was written, the following ports were available/open for any site in CloudFlare:
    For requests made via HTTP:

    80
8080
8880
2052
2082
2086
2095

    For requests made via HTTPS:

    443
2053
2083
2087
2096
8443

    At the time, we were using an Ubuntu GNU/Linux server, to instruct Ubuntu SSHD to listen to multiple ports we edited the file /etc/ssh/sshd_config and right after the lines:

    # What ports, IPs and protocols we listen for
Port 22

    we added another line with the new port we wanted to use:

    # What ports, IPs and protocols we listen for
Port 22
Port 2053

    After restarting the service
    service ssh restart;
    we were able to connect to our page as follows:
    ssh -p 2053 [email protected];

 

Cannot verify domain with Yandex when domain is behind CloudFlare 2

 στο HowTos  επισημασμένο με ετικέτα cloudflare / cname / domain / yandex Από

Recently we were trying to verify the ownership of a domain through yandex. We tried the CNAME approach which would be more universal and so we added a new CNAME record in the DNS configuration in CloudFlare.

The record had the following configuration:

  • Type: CNAME
  • Name: yamail-dd63c3831dbd
  • Value: mail.yandex.com
  • TTL: Automatic
  • Status: DNS and HTTP proxy (CDN)

We tried several times the verify domain button in https://domain.yandex.com/domain/example.com/ but it kept on failing saying that the CNAME record was not found. Only after we disabled the DNS and HTTP proxy (CDN) did it work.

So in the end, the properly working record was as follows:

  • Type: CNAME
  • Name: yamail-dd63c3831dbd
  • Value: mail.yandex.com
  • TTL: Automatic
  • Status: DNS Only

JetPack: Cannot Verify Site Ownership using pinterest 6

 στο WordPress  επισημασμένο με ετικέτα jetpack / pinterest / wordpress Από

Recently, we tried to verify the ownership of a site running WordPress with JetPack in Pinterest.

As the instructions say, we logged in to Pinterest and visited the settings page to Claim Website paragraph.

Using the meta tag solution we received a code similar to the one below:

<meta name="p:domain_verify" content="8525e3384b3545fb80b9e21f0910de21"/>

When we tried to add the code in the JetPack site verification page (https://example.com/wp-admin/admin.php?page=jetpack#/traffic) we got the following error:
Error updating settings. Invalid parameter(s): pinterest (Status 400).

To resolve the issue, we just added a space character right before the end of the tag /> and our code became:

<meta name="p:domain_verify" content="8525e3384b3545fb80b9e21f0910de21" />

Trying again, it worked properly!

Compiling DJI Onboard-SDK: error: ‘fd_set’ does not name a type

 στο C++ / GNU/Linux  επισημασμένο με ετικέτα compile / DJI / fedora / GNU/Linux / matrice / Onboard-SDK Από

While compiling the DJI Onboard SDK on a Fedora GNU/Linux we got the following error:

[ 41%] Building CXX object osdk-core/CMakeFiles/djiosdk-core.dir/platform/linux/src/linux_serial_device.cpp.o
In file included from Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:33:0:
Onboard-SDK/osdk-core/platform/linux/inc/linux_serial_device.hpp:97:3: error: ‘fd_set’ does not name a type; did you mean ‘tzset’?
 fd_set m_serial_fd_set;
 ^~~~~~
 tzset
In file included from /usr/include/sys/types.h:197:0,
 from /usr/include/stdlib.h:279,
 from /usr/include/c++/7/cstdlib:75,
 from /usr/include/c++/7/bits/stl_algo.h:59,
 from /usr/include/c++/7/algorithm:62,
 from Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:34:
Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp: In member function ‘int DJI::OSDK::LinuxSerialDevice::_serialStart(const char*, int)’:
Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:330:14: error: ‘m_serial_fd_set’ was not declared in this scope
 FD_ZERO(&m_serial_fd_set);
 ^
Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:330:14: note: suggested alternative: ‘m_serial_fd’
Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:331:26: error: ‘m_serial_fd_set’ was not declared in this scope
 FD_SET(m_serial_fd, &m_serial_fd_set);
 ^
Onboard-SDK/osdk-core/platform/linux/src/linux_serial_device.cpp:331:26: note: suggested alternative: ‘m_serial_fd’
make[2]: *** [osdk-core/CMakeFiles/djiosdk-core.dir/build.make:735: osdk-core/CMakeFiles/djiosdk-core.dir/platform/linux/src/linux_serial_device.cpp.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:86: osdk-core/CMakeFiles/djiosdk-core.dir/all] Error 2
make: *** [Makefile:130: all] Error 2

To resolve this, we added to the file Onboard-SDK/osdk-core/platform/linux/inc/linux_serial_device.hpp the following include directive right after line 37 (which contained #define LINUXSERIALDEVICE_H):


#include <sys/select.h>

Then, we issued make again which terminated successfully.

Source: https://github.com/dji-sdk/Onboard-SDK

Compilation Commands:


git clone https://github.com/dji-sdk/Onboard-SDK;

cd Onboard-SDK;

mkdir build;

cd build;

cmake ..;

#Modify the file Onboard-SDK/osdk-core/platform/linux/inc/linux_serial_device.hpp and add #include <sys/select.h> at the top

make all;

# Something

# Make profit