Tux

Mount a Windows share on a GNU/Linux server

 στο GNU/Linux  επισημασμένο με ετικέτα cifs / GNU/Linux / mount / share / ubuntu / windows Από 
sudo mount -t cifs //$WINDOWS_FILE_SERVER/$SHARED_FOLDER /var/www/bytefreaks.net/shared/ -o username=remoteUser,password='123abc',domain=bytefreaks.net,file_mode=0777,dir_mode=0777;

The command sudo mount -t cifs //$WINDOWS_FILE_SERVER/$SHARED_FOLDER /var/www/bytefreaks.net/shared/ -o username=remoteUser,password='123abc',domain=bytefreaks.net,file_mode=0777,dir_mode=0777 is used to mount a shared folder from a Windows file server onto a Linux system.

To break down the command further, here is a detailed explanation of each component:

sudo – this command is used to run the following command as a superuser or root. It is required in this instance as mounting requires administrative privileges.

mount – the mount command is used to mount a file system onto a directory in the Linux file system hierarchy.

-t cifs – this option specifies the type of file system that is being mounted. In this case, it is the Common Internet File System (CIFS), which is used for file sharing between Windows and Linux systems.

//$WINDOWS_FILE_SERVER/$SHARED_FOLDER – this is the network path to the shared folder on the Windows file server. The $WINDOWS_FILE_SERVER and $SHARED_FOLDER are placeholders for the actual Windows file server name and shared folder name, respectively.

/var/www/bytefreaks.net/shared/ – this is the mount point, or the location in the Linux file system hierarchy where the shared folder will be mounted.

-o username=remoteUser,password='123abc',domain=bytefreaks.net,file_mode=0777,dir_mode=0777 – these are the mount options that are specified when mounting the shared folder.

The username option specifies the username of the remote user that has access to the shared folder. In this case, the remote user is named remoteUser.

The password option specifies the password for the remote user.

The domain option specifies the domain or workgroup that the Windows file server belongs to. In this case, the domain is bytefreaks.net.

The file_mode and dir_mode options specify the permissions that should be set on the files and directories within the mounted shared folder. In this case, both are set to 0777, which means that all users have full read, write, and execute permissions on all files and directories within the mounted shared folder.

In summary, the sudo mount -t cifs //$WINDOWS_FILE_SERVER/$SHARED_FOLDER /var/www/bytefreaks.net/shared/ -o username=remoteUser,password='123abc',domain=bytefreaks.net,file_mode=0777,dir_mode=0777 command is used to mount a shared folder from a Windows file server onto a Linux system with the specified mount options.

Do SFP transceivers have a MAC address or does the address belongs to the SFP port?

 στο Firewall / Other  επισημασμένο με ετικέτα MAC / network / SFP / transceiver Από

SFP (Small Form-factor Pluggable) transceivers do not have a MAC address. The MAC address is assigned to the network interface controller (NIC) or network adapter, which is the hardware component responsible for connecting a device to a network.

The SFP transceiver is a hot-swappable input/output device that plugs into a port on a network switch, router, or other networking devices and allows the device to transmit and receive data over fiber optic or copper cables. The SFP port to which the SFP transceiver is connected is typically assigned a unique MAC address by the device manufacturer.

Therefore, the MAC address belongs to the device’s network interface using the SFP port, not the SFP transceiver itself.

A solution to running out of memory while executing mysqldump

 στο Applications  επισημασμένο με ετικέτα /etc/fstab / /proc/meminfo / /proc/swaps / dd / fstab / mysql / mysqldump / swapon Από

Are you trying to perform a mysqldump on a large table and running out of memory every time? This can be a frustrating experience. Even if you try to use the –quick parameter, you may still run out of memory. In this blog post, we will discuss a solution to this problem.

One option is to create a swap file to add more swap space. A swap file differs from a swap partition but can be accessible and dynamic. In the following steps, we will show you how to create a swap file.

First, create an empty file. This file will contain virtual memory contents, so make sure to create a file big enough for your needs. The following command will create a 1GiB file, which means +1GiB swap space for your system:

dd if=/dev/zero of=/media/tux/bigdisk/swapfile.img bs=1024 count=1M;

If you want to create a 3GiB file, change the count value to count=3M. Refer to the man dd for more information.

Next, make a “swap filesystem” inside your new swap file using the following command:

mkswap /media/tux/bigdisk/swapfile.img;
chmod 600 /media/tux/bigdisk/swapfile.img;
chown root:root /media/tux/bigdisk/swapfile.img;

To ensure that your new swap space is activated while booting up your computer, add it to the filesystem configuration file /etc/fstab. Add the following line to the end of the file:

/media/tux/bigdisk/swapfile.img swap swap sw 0 0

This is recommended because other filesystems (at least one that contains a swap file) must be mounted in read-write mode before we can access any files.

Finally, you can either reboot your computer or activate the new swap file manually with the following command:

swapon /media/tux/bigdisk/swapfile.img;

If everything goes well, you should see that more swap space is available for use. You can use the following commands to check your new swap and confirm that it is active:

cat /proc/swaps;

This should display something like:

Filename                           Type       Size    Used    Priority
/swapfile                          file       16777212 1048796    -2
/media/tux/bigdisk/swapfile.img    file       67108860 0          -3

You can also use the following command to check your swap usage:

grep 'Swap' /proc/meminfo;

This should display something like:

SwapCached:         132456 kB
SwapTotal:        83886072 kB
SwapFree:         82837276 kB

Creating a swap file can be an effective solution to running out of memory while performing a mysqldump on a large table. It is a simple, dynamic solution that can be implemented easily on most Linux systems. Following the steps outlined in this post, you should be able to create a swap file and add more swap space to your system.

dbeaver: native client is not specified for connection

 στο Applications  επισημασμένο με ετικέτα dbeaver / mysql / mysqldump Από

If you’re using DBeaver to perform a database dump, you may encounter an error that says, “native client is not specified for connection.” This error typically occurs when DBeaver can’t find the mysqldump executable on your system. Fortunately, there is a simple solution to this problem.

To resolve this issue, you need to specify the location of the mysqldump executable in DBeaver. Here are the steps you can follow:

  1. Click on the “Local Client …” button in the Export dialog of DBeaver. This will open a new pop-up window where you can specify the location of the mysqldump executable.
  2. From the drop-down menu in the pop-up window, select the “Browse …” option. This will allow you to navigate to the installation folder where mysqldump is located on your system.
  3. Once you’ve located the mysqldump executable, click OK on both windows. This will save your settings and allow you to perform a database dump using DBeaver.

To find the location of the mysqldump executable on your system, you can use the following command in a terminal window:

which mysqldump;

This command will display the full path to the mysqldump executable. Once you have this information, you can follow the steps above to specify the location of mysqldump in DBeaver.

In summary, if you’re getting the “native client is not specified for connection” error when trying to perform a database dump in DBeaver, you can resolve it by specifying the location of the mysqldump executable using the steps outlined above. The “which mysqldump” command can be used to find the location of mysqldump on your system.