Μηνιαία αρχεία: Φεβρουάριος 2017

Fedora: Start a Virtual Machine using a physical hard disk

 στο Virtualization  επισημασμένο με ετικέτα physical hard disk / qemu Από

Recently, we wanted to start a Virtual Machine running a Windows installation from a physical hard disk.

We could not find a way for GNOME Boxes to achieve this, so we installed qemu to do so.

We installed qemu using:


sudo dnf install qemu -y;

Configuring our command to start the Virtual Machine from the physical hard drive:

  • Our hard disk was identified on the physical machine as /dev/sda so we set the -hda parameter to that value.
  • Then we added the parameter -boot c to instruct the virtual machine to boot from the first hard disk.
  • The default guest start-up RAM size was 128 MiB, so we set the parameter -m to 4096 to give to the virtual machine 4GB of RAM.
  • Finally we added the -snapshot parameter which instructed the system to write to temporary files instead of the disk image files (all disk images are considered as read only).
    In this case, the raw disk image used are not written back. When sectors are written, they are written in a temporary file created in /tmp.
    You can however force the write back to the raw disk images by using the commit monitor command (or C-a s in the serial console).

In the end our command was as follows:


sudo qemu-kvm -snapshot -m 4096 -boot c -hda /dev/sda;

Start CLion as root on Fedora 1

 στο GNU/Linux  επισημασμένο με ετικέτα clion / linux / root / x-server / xhost Από

Solution

Execute the following as a normal user


xhost +si:localuser:root;
sudo ./clion.sh;

Background Story and More Information

Recently we needed to start CLion as root on Fedora to allow the application we were developing to bind the DHCP service of the system.
When we tried to start CLion as root we got the following error:

java.awt.AWTError: Can't connect to X11 window server using ':0' as the value of the DISPLAY variable.

Specifically, the whole error log was as follows:

[george@bytefreaks bin]$ sudo ./clion.sh 
[sudo] password for george: 
No protocol specified

Start Failed: Failed to initialize graphics environment

java.awt.AWTError: Can't connect to X11 window server using ':0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.access$200(X11GraphicsEnvironment.java:65)
    at sun.awt.X11GraphicsEnvironment$1.run(X11GraphicsEnvironment.java:115)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:74)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:264)
    at java.awt.GraphicsEnvironment.createGE(GraphicsEnvironment.java:103)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:82)
    at sun.awt.X11.XToolkit.<clinit>(XToolkit.java:126)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:264)
    at java.awt.Toolkit$2.run(Toolkit.java:860)
    at java.awt.Toolkit$2.run(Toolkit.java:855)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:854)
    at java.awt.Toolkit.getEventQueue(Toolkit.java:1734)
    at java.awt.EventQueue.isDispatchThread(EventQueue.java:1043)
    at javax.swing.SwingUtilities.isEventDispatchThread(SwingUtilities.java:1361)
    at javax.swing.text.StyleContext.reclaim(StyleContext.java:454)
    at javax.swing.text.StyleContext.addAttribute(StyleContext.java:311)
    at javax.swing.text.html.StyleSheet.addAttribute(StyleSheet.java:578)
    at javax.swing.text.StyleContext$NamedStyle.addAttribute(StyleContext.java:1501)
    at javax.swing.text.StyleContext$NamedStyle.setName(StyleContext.java:1312)
    at javax.swing.text.StyleContext$NamedStyle.<init>(StyleContext.java:1259)
    at javax.swing.text.StyleContext.addStyle(StyleContext.java:107)
    at javax.swing.text.StyleContext.<init>(StyleContext.java:87)
    at javax.swing.text.html.StyleSheet.<init>(StyleSheet.java:166)
    at javax.swing.text.html.HTMLEditorKit.getStyleSheet(HTMLEditorKit.java:391)
    at com.intellij.util.ui.UIUtil.<clinit>(UIUtil.java:102)
    at com.intellij.ide.plugins.PluginManager.start(PluginManager.java:73)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:498)
    at com.intellij.ide.Bootstrap.main(Bootstrap.java:39)
    at com.intellij.idea.Main.main(Main.java:81)

This error occurred because the default configuration of the X server permissions did not allow the root to connect to it.
To verify this, we used xhost X server access control program to check the permissions.
Executing xhost with no command line arguments gave us a message indicating whether or not access control was currently enabled, followed by the list of those users allowed to connect.
For example in our case the output was as follows:


[george@bytefreaks bin]$ xhost
access control enabled, only authorized clients can connect
SI:localuser:george

To add root to the list of users that was allowed to start an X application we executed the following command:


[george@bytefreaks bin]$ xhost +si:localuser:root
localuser:root being added to access control list

Executing xhost again, we got the updated list which included the root


[george@bytefreaks bin]$ xhost
access control enabled, only authorized clients can connect
SI:localuser:root
SI:localuser:george

After this, we were able to start CLion using sudo with no problems.


[george@bytefreaks bin]$ sudo ./clion.sh

Note: This patch is not permanent, we actually execute it once at every restart of the machine.

g++ not found on Fedora 25

 στο GNU/Linux  επισημασμένο με ετικέτα dnf / fedora / g++ / group / install Από

On a Fedora 25 (64bit) we got the error g++ not found.

We could have installed g++ using:


sudo dnf install gcc-c++ -y;

But we wanted to install all common additional development tools that we might need for C/C++ development in the future without going over the list of available packages to find which ones.
To do so, we installed all the packages of the group that is marked to be used for C development using dnf as follows:


sudo dnf group install "C Development Tools and Libraries" -y;

A couple of notes on moving a VirtualBox ‘.vdi’ disk image to a GNOME Boxes virtual machine

 στο Virtualization  επισημασμένο με ετικέτα boxes / gnome / gnome boxes / Guest Additions / migration / oracle / virtualbox Από

Recently we had a CentOS virtual machine on VirtualBox which we wanted to use in GNOME Boxes.
We copied the .vdi disk image and we used it to create a new virtual machine in Boxes.

Note A:

By doing this we realized that the system did not reuse the .vdi image.
It merely created a copy at ~/.local/share/gnome-boxes/images/ that was suitable for GNOME Boxes.
So, be sure to have enough space when doing an import like this.
You will need at least twice the space of the .vdi image to complete the migration.

Note B:

When the guest OS started the window manager crashed and it did not allow us to login.
We assumed that this issue occurred due to the VirtualBox Guest Additions that were installed on the guest OS.
As we could not login with the graphical interface, we could not verify this claim.

Fortunately, CentOS (and many other Linux distributions) allow you to switch to a console login using the key combination alt + ctrl + F3.
(There are more than one valid key combinations to do this. In some systems alt + ctrl + F4 is also valid or alt + ctrl + F1 etc).
We hoped that by trying to login via a console login, the Guest Additions would not start and the system would not crash, which luckily this was the case, and we managed to login through the console!

After we logged in, we had to remove the Guest additions. To do so we had to execute the uninstall script that was located at /opt/VBoxGuestAdditions-X.Y.Z/uninstall.sh
(X.Y.Z is the version number of the installed VirtualBox Guest Additions).

When the removal was complete, we executed sudo reboot to restart the system and unload any VirtualBox services that could be executing at the time.
Once the system completed the restart we were able to login properly from the GUI of GNOME and use our virtual machine properly.