Ετήσια αρχεία: 2021

sign_and_send_pubkey: signing failed for RSA from agent: agent refused operation

 στο Bash / GNU/Linux  επισημασμένο με ετικέτα public key / ssh Από

When trying to ssh to a machine using a public key, we got the following error:

ssh '[email protected]'
sign_and_send_pubkey: signing failed for RSA "/home/tux/.ssh/id_rsa" from agent: agent refused operation

The problem was with the local .ssh folder which had wrong permissions set. To fix the above problem, we issued the following commands:

chmod 700 ~/.ssh;
chmod 600 ~/.ssh/*;

Reset a WatchGuard Firebox M200 1

 στο HowTos  επισημασμένο με ετικέτα admin / default password / factory reset / Firebox / M200 / WatchGuard Από
  1. Power on the WatchGuard Firebox M200.
  2. Wait until the Arm indicator ( Shield symbol ) turns solid green.
    The indicator is found on the front part of the device (it is the second light on the column with the three lights).
  3. Press and hold the Reset button on the front of the device.
    The reset button is right next to the three lights.
    Do not release the button until step 8.
  4. After five seconds, the Arm indicator ( Shield symbol ) will turn red.
  5. Continue to hold the Reset button even if the Arm indicator ( Shield symbol ) is not lit.
  6. After approximately 40 seconds, the Arm indicator ( Shield symbol ) should start to flash green.
  7. Continue to hold the Reset button while the Arm indicator ( Shield symbol ) flashes green once per second.
  8. Once the Arm indicator ( Shield symbol ) starts to flash green twice per second, release the Reset button.
  9. Wait until the Arm indicator ( Shield symbol ) starts to flash red again.
  10. Press and hold the Reset button for five seconds to reboot the device.
  11. The Firebox will restart with factory-default settings.

After you perform the reset procedure, the Firebox will be reset to factory-default settings.
Any saved backup images will be deleted from the Firebox.
Interface 0 will be enabled as an external interface, as a DHCP client.
Interface 1 will be enabled as a trusted interface with the IP address 10.0.1.1, and a DHCP server will be enabled.
The default admin and status management user accounts will be available, with the default passphrases (default password) which will be the word readwrite.
The Web Setup Wizard will start automatically when you log in to Fireware Web UI.
The device will be discoverable by the WSM Quick Setup Wizard.
The device will be discoverable as a new FireCluster member (if the device supports FireCluster).

“Mixed content blocked” when running an HTTP AJAX operation on an HTTPS page

 στο JavaScript  επισημασμένο με ετικέτα Content-Security-Policy / http / https / upgrade-insecure-requests Από

Recently, we got a peculiar error on an HTTPS website while making Ajax requests.
Even though the website was full HTTPS, the Ajax request using a relative path was getting the “Mixed content blocked” error message.
To resolve this issue fast (without messing with the Javascript code), we added the following meta tag in the website’s header.

<meta http-equiv="Content-Security-Policy" content="upgrade-insecure-requests">

Sign language versus Voice

 στο Funny  επισημασμένο με ετικέτα funny / sign language / voice Από

Sign language has a faster transmission speed than voice as it travels with the speed of light (299.792.458 m/s) while the voice travels at the speed of sound in air (343 m/s). Unfortunately, sign language cannot produce a lot of data per second (unless of course, you are Hatake Kakashi – はたけ カカシ) and so it cannot take advantage of its bandwidth. On the other hand, the voice can use a bigger part of its available bandwidth and can achieve a bigger overall throughput in most cases.